آلیاژ 400 uns n04400 en 2.4360 مونل 400 پیچ

مشخصات فنی

Alloy 400 UNS N04400 EN 2.4360 Monel 400 screw

1. Prompt & Professional Response.

2. Competitive & Credible Price.

3. High Quality & Fast Delivery.

4. Customized Service--(Produced according to customer's drawing or sample).

Partial order records of related products for your reference

Monel 400 fastener screw Exported to United Arab Emirates.

Monel 400 hexagon head bolts c/w nuts Exported to Kerea

Brief introduction of the material

Alloy 400 UNS N04400 EN 2.4360 Monel 400

A. Alloy 400 UNS N04400 EN 2.4360 Monel 400 Overview

Monel 400 is a nickel-copper alloy (about 67% Ni –23% Cu) that is resistant to sea water and steam at high

temperatures as well as to salt and caustic solutions. Characteristics:

1) Resistant to seawater and steam at high temperatures

2) Excellent resistance to rapidly flowing brackish water or seawater

3) Excellent resistance to stress corrosion cracking in most freshwaters

4) Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

5) Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but

is seldom the material of choice for these acids

6) Excellent resistance to neutral and alkaline salt

7) Resistance to chloride induced stress corrosion cracking

8) Good mechanical properties from sub-zero temperatures up to 1020° F

9) High resistance to alkalis

برنامه های کاربردی:

1) Marine engineering

2) Chemical and hydrocarbon processing equipment

3) Gasoline and freshwater tanks

4) Crude petroleum stills

5) De-aerating heaters

6) Boiler feed water heaters and other heat exchangers

7) Valves, pumps, shafts, fittings, and fasteners

8) Industrial heat exchangers

9) Chlorinated solvents

10) Crude oil distillation towers

B.Chemical Composition, %

C. Mechanical Properties

ویژگی های کششی دمای اتاق معمولی از مواد آنیل شده

D.Available Forms of Alloy 400 UNS N04400 EN 2.4360 Monel 400

Plate & sheet, bar, pipe & tube, flanges, fittings( elbow, reducer, tee, cross, bend and pipe cap) and wire.

ASTM Specifications

Other Available Materials:

فولاد آلیاژی نیکل

Nickel 200/201, UNS N02200/N02201, EN 2.4066/2.4068;

Monel 400/K500, UNS N04400/N05500, EN 2.4360/2.4375;

Inconel 600/601/625, UNS N06600/N06601/N06625, EN 2.4816/2.4851/2.4856;

Incoloy 800/800H/800HT/825, UNS N08800/N08810/N08811, EN 1.4876/1.4958/1.4959;

Hastelloy C-276/C-22, UNS N10276/N06022, EN 2.4819/2.4602;

Alloy 20/Carpenter 20Cb3/UNS N08020/EN 2.4660; AL-6XN/UNS N08367;

Duplex Steel

UNS S31803/ S32205/ SAF 2205/ EN 1.4462/ A182 F51;

UNS S32750/ S32207/ SAF 2207/ EN 1.4410/ A182 F53;

UNS S31254/ 254SMO/ EN 1.4547/ A182 F44;

UNS N08904/ 904L/ EN 1.4539/ A182 F904L;

UNS S32760/ A182 F55; UNS S31050/ EN 1.4466; 17-4PH/ UNS S17400/ EN 1.4548;
فولاد ضد زنگ

AISI 347, 347H, 316Ti, 321, 316, 316L, 304L